Sandmeyer Steel Blog
Quickmill Annihilator Cut Piece
This image shows a stack of four type 304 ½” thick x 40” outside diameter heat exchanger baffles with 5/8” diameter holes drilled in the stack for speed and economy. This was done on the new Sandmeyer Steel Company Quick-Mill Annihilator.
Posted on: September 28, 2017Sandmeyer Steel 65th Anniversary Picnic Video
Posted on: September 27, 2017Extra Long Cut Piece- Alloy 800
This is a recent piece we did for our thermal processing equipment manufacturer customer. It’s 9 ft long, cut from 800 with a beveled edge, done on our waterjet machine.
Posted on: September 21, 2017Multi-Step Processing
This picture shows the top and bottom of a job done recently at Sandmeyer using a multi-step process. First, the piece was put through the machine shop and we roughed the OD and the ID, taking a lot of the bevel off. Next, the pieces were brought to be finished on our heavy duty milling machine. To learn more about our value-added plate processing capabilities, click here.
Posted on: September 14, 2017From the Shop
Here is a recent example of a job we shipped out to our customer. With our vast in-house plate processing capabilities, Sandmeyer is able to cut special shapes with speed and accuracy, including intricate and unusual shapes like this one.
Posted on: September 7, 2017